熟悉SolidWorks CAM 界面
本帖最后由 寂静回声 于 2019-3-9 14:07 编辑The SOLIDWORKS CAM user interface closely follows the above process. These commands will be discussed in greater detail in future articles.
A Set-up options
BProgram generation commands
COptions to add operations interactively
D Technology Database Options
E Options for defining features to be extracted when using (AFR)
F CAM Feature Tree – Shows extracted features
G CAM Operations Tree – Edit or add operations interactively
H CAM Tool Tree – Editing current Tool Crib
SOLIDWORKS CAM Standard licenses are available to all SOLIDWORKS Subscription Service customers using SOLIDWORKS 2018 or higher.
FeaturesSOLIDWORKS CAM
StandardSOLIDWORKS CAM
Professional
General Features
AFR – Automatic Feature Recognition – Holeshttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
AFR – Automatic Feature Recognition – Pockets, Bosshttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
AFR – Automatic Feature Recognition – Turn
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
KBM – Knowledge Based Machininghttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Automatic Recognition of Multiple Setupshttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Indexing of the 4th & 5th axes including tombstone
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Sorting of the Operationshttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Toolpath Simulationhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Step Through Simulationhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Tolerance Based Machining – C# macrohttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Assembly Machining
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
CAMWorks Configurations
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Stock and Work in Process Modelshttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Setup Sheets – XML, XMLT, MDBhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
e-Drawings Publisherhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Universal Post Generator (UPG)
Ancillary applications installed separatelyhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
CAMWorks Library Features (supports only 2.5x features)https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Import / Export of CAM datahttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Contain and Avoid areas and featureshttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
MES Feed Speed Libraryhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
2.5 Axis Milling Features
Interactive Feature Creationhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Rough Millinghttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Finish (Contour) Millinghttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Face Millinghttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Thread Millinghttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Center Drillinghttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Drillinghttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Countersinkinghttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Reaminghttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Tappinghttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Engravinghttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
3 Axis Milling Features
Multi-surface feature creationhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Area Clearancehttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Z Levelhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Flat Areahttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gifhttps://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Contain and avoid areas and features
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Turning Features
Face Rough
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Face Finish
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Rough Turn
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Finish Turn
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
OD Threading
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Cut-off
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Groove Rough
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Groove Finish
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Bore Rough
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Bore Finish
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Center Drill – on center
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Drill – on center
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Tap – on center
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
ID Threading
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
Extra Features
High-Speed Machining
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
VoluMillhttps://s.w.org/images/core/emoji/11.2.0/72x72/2122.png
https://www.javelin-tech.com/3d/wp-content/uploads/red_sq.gif
NC Editor
页:
[1]